We can calibrate your Fiber Optic Power Meters at two service price levels: ISO9001 or ISO/ IEC 17025
- We check the cleanliness of the optical detector. If we find a performance problem with the received instrument, we will let you know.
- We test calibration accuracy. You can also ask for a linearity test.
- We usually use a ceramic connector for calibration, ask if you want some other condition there.
- We have NATA traceability for optical power meter calibration from 350 - 1650 nm
- We comply with the latest power meter calibration standards
- We calibrate thousands of optical power meters, so we are very experienced!
We can calibrate your free-space Optical Power Meter or Radiometer to ISO9001or ISO/ IEC 17025
- We check the cleanliness of the optical detector. If we find a performance problem with the received instrument, we will let you know.
- We test calibration accuracy. You can also ask for a linearity test.
- We have NATA traceability for optical power meter calibration from 350 - 1650 nm
- We have a HeNe laser for spot calibration at about 1 mW
- We have a few lasers / LEDS for other discrete wavelengths
- Or we can dial-a-wavelength at a low power level of about -30 dBm
- We comply with the latest power meter calibration standards
- The sensor needs to be large enough to aim a free space beam into it, 3 mm dia or larger is good
Most power meter calibrations are performed using a wavelength selectable non-coherent, non-polarized light source with a center wavelength accuracy of 0.5 nm and 10 -20 nm spectral width.
Free Space Detector Calibration in Progress
